Bose 700 EQ Settings for Best Sound Output

So you want to know the best EQ settings for your Bose 700 headphones to get the best sound output? Great choice! The Bose 700 headphones are top-notch when it comes to sound quality, and with a little bit of tweaking, you can really make them shine.

First, let’s go through what EQ settings are. EQ stands for equalization, which is a fancy term for adjusting the balance of frequencies in your music. By adjusting the EQ settings on your Bose 700 headphones, you can boost or cut certain frequencies to make your music sound better.

bose 700 eq settings

Bose 700 EQ Settings for Best Sound Output

Below are the steps to settings your Bose 700 EQ Settings for the Best Sound Output

Step 1: Connect Your Bose 700 Headphones to Your Device 

Before you can adjust the EQ settings on your Bose 700 headphones, you need to make sure that they are properly connected to your device. You can connect your headphones to your device via Bluetooth or the included audio cable.

Step 2: Launch the Bose Music App 

Once your headphones are connected to your device, launch the Bose Music app. This app is available for both Android and iOS devices and can be downloaded from the respective app stores.

Step 3: Select Your Bose 700 Headphones 

After launching the app, select your Bose 700 headphones from the list of available devices.

Step 4: Open the EQ Settings 

Once you have selected your headphones, tap on the “Settings” icon at the bottom right corner of the screen. This will open a list of settings options for your headphones. Scroll down to find the “EQ” option and tap on it to open the EQ settings.

Step 5: Customize the EQ Settings 

The EQ settings page will display a graph with different frequency bands that can be adjusted. Each band represents a range of frequencies, and you can adjust the intensity of each band by sliding the corresponding dot up or down.

The frequency bands are as follows:

  • 20 Hz to 250 Hz: Represents the bass frequencies
  • 250 Hz to 2 kHz: Represents the mid-range frequencies
  • 2 kHz to 20 kHz: Represents the high frequencies

You can customize the EQ settings by adjusting the intensity of each frequency band. For instance, if you prefer more bass in your music, you can increase the intensity of the bass frequencies by sliding the dot corresponding to the 20 Hz to 250 Hz band upwards.

Step 6: Save Your Custom EQ Settings 

Once you have adjusted the EQ settings, the next thing to do would be to save your custom EQ settings by tapping on the “Save” button at the bottom of the screen. Saving these settings will ensure that they are applied every time you use your headphones.

Using the EQ settings, there are many ways to try out different sound features and ensure you get the right sound based on what you’re watching. We’ve have added a guide to the best EQ settings for movies and gaming to help you get the most out of your Bose 700.

Recommended Bose 700 EQ Settings for Best Sound Output 

  • Below are the recommended Bose 700 EQ Settings for best sound:
  • First, set the EQ to “Manual” mode. This will give you the most control over the sound.
  • Boost the bass a bit by increasing the low frequencies. We recommend setting the Low EQ to around +2 or +3.
  • Next, you’ll want to adjust the midrange frequencies. This is where most of the vocals and instruments sit in the mix. We prefer setting the Mid EQ to around 0 or +1.
  • Finally, adjust the high frequencies to your preferred setting. This will affect the clarity of the sound. Thje best setting for the High EQ is around -1 or -2.

Keep in mind that these are just general guidelines. You can adjust the EQ settings to your own personal taste, depending on what type of music you’re listening to. Let’s say you’re listening to electronic music, you might want to boost the bass even more. Or if you’re listening to classical music, you might want to decrease the bass a bit and boost the midrange and high frequencies.

Best Bose 700 EQ Settings (for Games and Movies) 

When it comes to using your Bose 700 headphones for gaming and movies, there are different EQ settings that you can use to optimize the sound for each scenario. 

These settings are just a starting point that should help you to get the most out of your Bose 700 headphones for gaming and movies.

For gaming:

  • Set the EQ to “Manual” mode.
  • Boost the bass to add more impact to explosions and gunfire. Set the Low EQ to around +4 or +5.
  • Lower the midrange frequencies slightly to reduce any muddiness in the sound. Take the setting for the Mid EQ to around -2 or -3.
  • Boost the high frequencies to help you hear more details in the sound effects and dialogue. Bring the setting for the High EQ to around +2 or +3.

With these EQ settings, you can hear all of the important details in the game, while also adding some extra oomph to the action.

For movies:

  • Set the EQ to “Movie” mode, if your Bose 700 headphones have this preset. This preset is designed specifically for movies and will give you the best sound for this scenario.
  • Boost the bass slightly. This should make the explosions and action scenes more interesting. Tweaking the Low EQ setting to around +2 or +3.
  • Keep the midrange frequencies neutral to ensure that the dialogue is clear and easy to understand. Set the Mid EQ to around 0.
  • Boost the high frequencies. Let the High EQ setting be around +2 or +3.

These EQ settings will help you to fully immerse yourself in the movie and experience all of the sound effects and music in the best way possible.



  • Lawrence Munson

    I'm Lawrence Munson, a tech blogger and audio enthusiast. is where I share my thoughts and findings on the latest audio gear such as earphones, soundbars, subwoofers, equalizers, etc. I love to test new products to help my readers understand and enjoy their devices better, and I'm always eager to share my knowledge about audio technology and how it works.