Yamaha HS8 Best Settings Guide

The Yamaha HS8 is a top-of-the-line studio speaker known for its accuracy and detailed sound. It has become a top choice for music producers and audio enthusiasts due to its impressive features. 

When it comes to achieving perfect sound reproduction from the speaker, it all boils down to having the right settings

In this article, you will learn about the settings of the Yamaha HS8. We will dive into how they work and how you can optimize these settings to achieve the best audio experience.

yamaha hs8 best settings

Yamaha HS8 Best Settings

The best settings for the Yamaha HS8 would always depend on your preferences. However, if you’re a newbie and you don’t have any idea of the best settings, you can try out the  following tweaks we have provided.

  • Input Level: The input level determines how sensitive the speakers are to the audio signal. Setting the input level correctly is crucial to avoid distortion or loss of details in the sound. Start by setting the input level to 0dB and then adjust it gradually based on the strength of the incoming signal. Be careful not to set the input level too high, as it can cause clipping and distortion.
  • High Trim: The High Trim setting allows you to adjust the high-frequency response of the HS8. It helps you make up for room acoustics or personal preferences. If the high frequencies sound too harsh or pronounced, you can reduce the High Trim gradually until the sound becomes more balanced and pleasant. On the other hand, if you feel that the high frequencies lack detail, increasing the High Trim can help with that.
  • Room Control: The Room Control setting enables you to adjust the low-frequency response of the speakers. This is useful if your studio or listening room has too much bass or sounds muddy. By activating the Room Control switch, you can reduce the low frequencies and achieve a more balanced sound. However, if you find that your room lacks bass and sounds thin, you can disable the Room Control to enhance the low-end response.
  • Low Cut: The Low Cut setting is designed to remove unwanted low-frequency content, like rumble or subsonic noise, from the audio signal. It comes in handy when you’re using the HS8 with a subwoofer. When you engage the Low Cut switch, a high-pass filter is activated, removing frequencies below a specific cutoff point, typically set at 80Hz. This allows the HS8 to focus on reproducing midrange and high-frequency content more accurately.

Tweaking the Yamaha HS8 Settings

When it comes to optimizing your Yamaha HS8 speakers, you can follow these steps below to get started:

  • Calibration: Place the speakers at an equal distance from your listening position, forming an equilateral triangle. Make sure they are at ear level to ensure accurate monitoring.
  • Input Level Adjustment: Set the input level to 0dB and then adjust it gradually based on the strength of your audio source. Aim for a balanced sound without any distortion.
  • High Trim Adjustment: Listen to different well-mixed tracks across various genres and adjust the High Trim control to achieve a balanced high-frequency response that suits your choices.
  • Room Control Adjustment: Assess the bass response in your room and activate the Room Control switch if needed. You might want to test different settings to find the best mix and minimize room-induced resonances.
  • Low Cut Activation: If you’re using a subwoofer, engage the Low Cut switch to remove unwanted low-frequency content. Set the cutoff point to 80Hz or according to your subwoofer’s specifications.

Best Settings for Yamaha HS8

Here is a summary on the best settings for your Yamaha HS8. This should help you make the right decisions when setting up your studio. 

Music Production/Mixing

  • Input Level: Set the input level to 0dB and adjust it based on the strength of your audio source.
  • High Trim: Fine-tune the High Trim control to achieve a balanced high-frequency response. You would want to start at 0dB and reduce it slightly if the high frequencies sound too pronounced or harsh.
  • Room Control: Activate the Room Control switch if your studio has bass buildup or excessive low-end. Experiment with different settings to find the best balance.
  • Low Cut: If using a subwoofer, engage the Low Cut switch at 80Hz.


Keep in mind that the settings above are just to get you started. You will have to consider several factors including room characteristics and personal preferences when tweaking the settings. This will help you to make better adjustments. Overall, you need to calibrate the speakers, adjust the input level, fine-tune the High Trim and Room Control settings, and activate the Low Cut if necessary. With these optimized settings, you can unlock the full potential of your Yamaha HS8 and enjoy accurate and immersive sound reproduction in your studio or listening space.


  • Lawrence Munson

    I'm Lawrence Munson, a tech blogger and audio enthusiast. AudioJust.com is where I share my thoughts and findings on the latest audio gear such as earphones, soundbars, subwoofers, equalizers, etc. I love to test new products to help my readers understand and enjoy their devices better, and I'm always eager to share my knowledge about audio technology and how it works.