Skullcandy Headphones Not Pairing: Causes & Fixes

When shopping for headphones that produce high-quality sound with a sleek design for an improved listening experience, you can’t go with Skullcandy headphones. While they are top-of-the-line options, they can experience pairing issues. 

Skullcandy Headphones Not Pairing: Likely Causes

In this article, we will discuss the causes of Skullcandy headphones not pairing and provide you with effective solutions to get your headphones connected again.

Low Battery

When your Skullcandy headphones are running low on battery, they may not be able to connect to your device. This is because Bluetooth requires a certain amount of power to establish a connection. If your headphones are not charged enough, they may not have the power needed to connect to your device.

Connection Distance

Bluetooth has a limited range, usually around 33 feet. If you move too far away from your device while using your Skullcandy headphones, the Bluetooth signal may weaken and eventually disconnect. This can lead to pairing issues as your headphones will no longer be able to connect to your device.

Interference

Wireless devices in the area can interfere with the Bluetooth signal, causing your Skullcandy headphones to not connect. This interference can come from other Bluetooth devices, Wi-Fi signals, or even physical barriers like walls or other objects.

Outdated Firmware

The firmware on your Skullcandy headphones is essentially the software that controls how they function. If your headphones are running outdated firmware, they may not be able to connect to your device. This is because new Bluetooth standards and protocols are released over time, and your headphones may not be compatible with the latest version of Bluetooth that your device is using.

Skullcandy Headphones Not Pairing: DIY Fixes

Charge Your Headphones

If your Skullcandy headphones are not pairing, the first thing you should do is ensure that they have enough charge. If your headphones are running low on battery, they may not have the power needed to connect to your device.

Plug your headphones into a power source using a USB cable and wait for them to charge fully before attempting to pair them again.

Reset Your Headphones

If your headphones are not pairing, a reset may help. This will clear out any stored Bluetooth connections and restore your headphones to their default settings. To reset your Skullcandy headphones, turn them off and then press and hold the power button for 10 seconds until the LED light turns off.

Move Closer to Your Device

If you are experiencing connection distance issues, moving closer to your device may help. Try moving closer to your device and then attempt to pair your headphones again.

Turn off Other Wireless Devices

If other wireless devices are interfering with your Bluetooth signal, turn them off or move them further away from your Skullcandy headphones. This will reduce interference and make it easier for your headphones to connect to your device.

Update Firmware

To update your Skullcandy headphones’ firmware, visit the Skullcandy website and download the latest firmware update for your specific headphones model. Follow the instructions provided to update your headphones’ firmware to the latest version.

“Forget” and Re-pair Your Headphones

If none of the above solutions work, forgetting your Skullcandy headphones from your device and then re-pairing them may help. To do this, go to your device’s Bluetooth settings, find your Skullcandy headphones, and then select “Forget this device.”

After you have forgotten your headphones, turn them off and then back on again. Attempt to pair your headphones again by going to your device’s Bluetooth settings and selecting your Skullcandy headphones.

Contact Skullcandy Support

If none of the above solutions work, contact Skullcandy support for further assistance. They can help diagnose the issue and provide you with additional solutions to fix the problem. Skullcandy has a dedicated support team that can help you troubleshoot any issues you are experiencing with your headphones.

How to Prolong the Lifespan of Your Skullcandy Headphones 

Here are some tips to help you prolong the lifespan of your Skullcandy headphones:

Store your headphones properly

One of the most common causes of headphone damage is improper storage. Always keep your headphones in a dry and safe place, preferably in a hard case, when not in use. Avoid keeping them in damp or humid areas, and don’t leave them in direct sunlight.

Clean your headphones regularly

It is essential to keep your headphones clean to prevent dust and dirt from accumulating on them. Wipe the ear pads, headband, and cable with a clean, dry cloth regularly. Use a mild cleaning solution, if necessary, but make sure it doesn’t contain harsh chemicals that can damage the headphones.

Don’t expose your headphones to extreme temperatures

Exposure to extreme temperatures can damage the internal components of your headphones. Avoid leaving them in a car or in direct sunlight for an extended period. If you’re traveling with your headphones, make sure to pack them in a safe and temperature-controlled environment.

Handle your headphones with care

Skullcandy headphones are durable, but they’re not indestructible. Avoid dropping them or handling them roughly. Don’t pull the cable too hard or twist it, as this can damage the internal wiring.

Use a headphone case when traveling

If you’re traveling with your headphones, always use a protective case. A case will provide extra protection against bumps, scratches, and other damage that can occur during transit.

Don’t expose your headphones to water

Skullcandy headphones are not waterproof, so avoid exposing them to water or any other liquids. If your headphones do get wet, wipe them dry immediately with a clean, dry cloth and let them dry completely before using them.

Keep your headphones away from magnets

Magnets can damage the internal components of your headphones. Avoid keeping your headphones near speakers, televisions, or any other devices that generate a magnetic field.

Store your headphones in a tangle-free way

If you’re not using your headphones, make sure to store them in a tangle-free way. A simple way to do this is to wrap the cable around your hand and secure it with a twist tie or a Velcro strap.

By following these simple tips, you can prolong the lifespan of your Skullcandy headphones and ensure that you get the most out of your investment. With proper care and maintenance, your headphones can provide you with high-quality sound for many years to come.